Error connecting prolinks PHS100 HSDPA modem in fedora 11?

General discussion about Linux, Linux distribution, using Linux etc.

Error connecting prolinks PHS100 HSDPA modem in fedora 11?

Postby shamsat » Sun Aug 23, 2009 7:00 pm

Hi,
i read a topic a work arround installing prolink PHS100 modem in fedora 11 but cannot get connected to the net and this is the /var/log/messages error:
pppd 2.4.4 started by root, uid 0
Aug 20 05:41:29 user pppd[16871]: speed 1843200 not supported
Aug 20 05:41:29 user pppd[16871]: Using interface ppp0
Aug 20 05:41:29 user pppd[16871]: Connect: ppp0 <--> /dev/ttyUSB2
Aug 20 05:41:29 user pppd[16871]: CHAP authentication succeeded
Aug 20 05:41:29 user pppd[16871]: CHAP authentication succeeded
Aug 20 05:41:59 user pppd[16871]: IPCP: timeout sending Config-Requests
Aug 20 05:42:05 user pppd[16871]: Connection terminated.
Aug 20 05:42:05 user pppd[16871]: Modem hangup
Aug 20 05:42:05 user pppd[16871]: Exit.
-----
Aug 21 21:50:53 user pppd[5419]: Can't open options file /etc/ppp/peers/isp: No such file or directory
Aug 21 21:50:53 user pppd[5420]: pppd 2.4.4 started by shams, uid 0
Aug 21 21:50:53 user pppd[5420]: Using interface ppp0
Aug 21 21:50:54 user pppd[5420]: Connect: ppp0 <--> /dev/pts/1
Aug 21 21:51:24 user pppd[5420]: LCP: timeout sending Config-Requests
Aug 21 21:51:24 user pppd[5420]: Connection terminated.
Aug 21 21:51:25 user pppd[5420]: Modem hangup
Aug 21 21:51:25 user pppd[5420]: Exit.

and this wvdial.conf:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init4 = AT+CGDCONT=1,"IP","internet"
Username = ppp
Password = ppp
Phone = *99***1#
Modem Type = Analog Modem
Stupid Mode = yes
Baud = 9600
Dial Command = ATDT
Modem = /dev/ttyUSB2
ISDN = 0

any one can help please?
shamsat
Cadet
 
Posts: 8
Joined: Sat Feb 17, 2007 9:48 pm
Website: http://shamsat.shorturl.com
Yahoo Messenger: waaseh

Return to “%s” General

Who is online

Users browsing this forum: No registered users and 2 guests

cron