Page 1 of 1

Making a modem dialup connection in text mode

Posted: Thu Mar 23, 2006 9:42 pm
by turab
Hello Friends,
when i make dialup connection in Redhat gui mode i works fine, and when i tried to make it in plain text mode it do not work, Could you please guide me how do i make a dialup connection in plain text mode without using redhat-config-network-tui command.

Thanks in advance.

Re:

Posted: Fri Mar 24, 2006 9:02 am
by LinuxFreaK

Posted: Fri Mar 24, 2006 11:42 am
by usamahashimi
Hi
Are you trying to connect via wvdial? If so (and wvdialconf is not configuring your modem), creat a file /etc/wvdial.conf and paste the following lines, there;
[Dialer Defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = your_ISP_dialup_number
Username = your_ISP_username
Password = your_ISP_password
#Ask Password = 1
Stupid Mode = 1

Assuming that your modem is at /dev/modem and dont forget to change the dialup, ISP username and ISP password :) in these lines. Also dont forget to install wvdial :)
Thanks