HP ProLiant DL360 G5 Server series Installation

[lambda]

no, it's because of the sata raid controller. linux has had support for sata drives and controllers for several years, but support for sata raid is relatively weak.

is there some reason you don't want to use fc6 instead of fc4? it might have better hardware support.

[Atif_Khan]

Try this in rescue mode

grub> root (hd0,0)
grub> setup (hd0)
grub> root (hd1,0)
grub> setup (hd1)
grub> quit

[lambda]

Try this in rescue mode

ah yes, another useless suggestion from someone who can't be bothered to read the problem description.

[ather_36]

Salam
Why u not calling ur Hardware vendor?May be the problem is in ur Hardware.....Dont think this is new server.My dear we all are focusing on Linux Side.....Raza call ur vendor for Support.

[lambda]

Why u not calling ur Hardware vendor?

the hardware vendor does not support fc4 on the hardware.

May be the problem is in ur Hardware.....

wrong. it's a linux driver issue.

[syed]

A.A 2 All,

I have downloaded all the drivers of said server in rpm format from hp site. Now I want to know that can we merage those rpm files with ISO image of linux cd1 and burn new bootable cd containg the drivers of the server. If yes then what is procedure for merging these rpm file with ISO.

Regards ,

Syed Mohammd Raza

[Atif_Khan]

Try this in rescue mode

ah yes, another useless suggestion from someone who can't be bothered to read the problem description.

Bully attitude doesnt help.

I had the same problem and I did try the mentioned solution and it got resolved.

[lambda]

...except you didn't have the same problem. unless your sata raid controller was also unsupported by linux?

if you can't see the drives in the installer, how do you expect to see them under rescue mode, and how do you expect to do the install in rescue mode?

[dajazzguy]

maybe this link will be useful and clear the i core of the problem
http://www.mcnabbs.org/andrew/linux/proliant/