Asterisk Configuration file /etc/zaptel.conf

Discussion regarding the installation and configuration of Linux distributions.
numan82
Lance Naik
Posts: 19
Joined: Wed Aug 01, 2007 10:29 am
Location: San Jose CA United States
Contact:

Asterisk Configuration file /etc/zaptel.conf

Postby numan82 » Thu Aug 02, 2007 11:17 am

Aslam-o-Alikum,
I am totally newbie in the world of Asterisk, I've installed it successfully and now there is phase of configuring, I want to know, Do we need to removes only comments (#) signs for example in of /etc/zaptel.conf
# "fxsks" :this is what I want to configure
# "fxols" : Channel(s) are signalled using FXO Loopstart protocol.
# "fxogs" : Channel(s) are signalled using FXO Groundstart protocol.
# "fxoks" : Channel(s) are signalled using FXO Koolstart protocol.

now to configure
fxsks=2
is the right one or do I need to includes # sign or double quotes
Please help thanks
Numan Khan

Rishi
Lance Naik
Posts: 29
Joined: Mon Jun 20, 2005 10:29 pm

Postby Rishi » Thu Aug 02, 2007 3:17 pm

Dear Numan,

http://www.voip-info.org/wiki-Asterisk+ ... aptel.conf

You don't need to configure zatpel for Asterisk to run. Zaptel interfaces are the driver of translation devices like FXO, FXS. If you have the cards and required the translation check the link above.

Best Regards,

LinuxFreaK
Site Admin
Posts: 5132
Joined: Fri May 02, 2003 10:24 am
Location: Karachi
Contact:

Re:

Postby LinuxFreaK » Fri Aug 03, 2007 8:52 am

Farrukh Ahmed


Return to “Installation”

Who is online

Users browsing this forum: No registered users and 1 guest