Page 1 of 1

PPPoE Server on Redhat Linux

Posted: Fri Feb 15, 2008 12:30 pm
by nasacis
Dear All,

I installed and configured FreeRADIUS + PPPoE (rp-ppp) on redhat 9 but i am facing connecting problem when i try to connect from windows client. Error message as following:
Feb 15 17:26:59 radius pppoe-server[2968]: Session 1 created for client 00:b0:d0:7e:1e:ca (192.168.2.150) on eth2 using Service-Name ''
Feb 15 17:27:00 radius pppd[2968]: Plugin /etc/ppp/plugins/rp-pppoe.so loaded.
Feb 15 17:27:00 radius kernel: CSLIP: code copyright 1989 Regents of the University of California
Feb 15 17:27:00 radius kernel: PPP generic driver version 2.4.2
Feb 15 17:27:00 radius pppd[2968]: RP-PPPoE plugin version 3.8 compiled against pppd 2.4.4b1
Feb 15 17:27:00 radius pppd[2968]: Plugin radius.so loaded.
Feb 15 17:27:00 radius pppd[2968]: RADIUS plugin initialized.
Feb 15 17:27:00 radius pppd[2968]: pppd 2.4.4b1 started by root, uid 0
Feb 15 17:27:00 radius modprobe: modprobe: Can't locate module net-pf-24
Feb 15 17:27:00 radius pppd[2968]: Failed to create PPPoE socket: Address family not supported by protocol
Feb 15 17:27:00 radius pppd[2968]: Exit.
Feb 15 17:27:00 radius pppoe-server[2897]: Session 1 closed for client 00:b0:d0:7e:1e:ca (192.168.2.150) on eth2
Feb 15 17:27:00 radius pppoe-server[2897]: Sent PADT

kindly help in this regard

Posted: Fri Feb 15, 2008 3:48 pm
by x2oxen
Want to run pppoe server use mikrotik

Posted: Fri Feb 15, 2008 3:54 pm
by nasacis
Any other solution ?

Regards

Posted: Sat Feb 16, 2008 12:29 am
by kbukhari
re-compile rp-ppp with --enable-ipv6=no option

Posted: Sat Feb 16, 2008 5:33 pm
by nasacis
there is no option to compile with --enable-ipv6 but vain
by the way, i compile rp-pppoe with above option but i am getting same error

any other solution

Posted: Thu Feb 21, 2008 6:12 pm
by nasacis
now, i installed rhel 4 for PPPoE server and now i am getting these errors

Feb 21 22:55:19 fsdtest pppoe-server[4104]: Session 1 created for client 00:b0:d0:7e:1e:ca (192.168.2.100) on eth0 using Service-Name ''
Feb 21 22:55:19 fsdtest pppd[4104]: Plugin /etc/ppp/plugins/rp-pppoe.so loaded.
Feb 21 22:55:19 fsdtest kernel: CSLIP: code copyright 1989 Regents of the University of California
Feb 21 22:55:19 fsdtest kernel: PPP generic driver version 2.4.2
Feb 21 22:55:19 fsdtest pppd[4104]: RP-PPPoE plugin version 3.8 compiled against pppd 2.4.4b1
Feb 21 22:55:19 fsdtest pppd[4104]: Plugin radius.so loaded.
Feb 21 22:55:19 fsdtest pppd[4104]: RADIUS plugin initialized.
Feb 21 22:55:19 fsdtest pppd[4104]: pppd 2.4.4b1 started by root, uid 0
Feb 21 22:55:19 fsdtest kernel: NET: Registered protocol family 24
Feb 21 22:55:19 fsdtest pppd[4104]: Connected to 00:b0:d0:7e:1e:ca via interface eth0
Feb 21 22:55:19 fsdtest pppd[4104]: Using interface ppp0
Feb 21 22:55:19 fsdtest pppd[4104]: Connect: ppp0 <--> eth0
Feb 21 22:55:19 fsdtest pppd[4104]: Couldn't increase MTU to 1500
Feb 21 22:55:19 fsdtest pppd[4104]: Couldn't increase MRU to 1500
Feb 21 22:55:21 fsdtest pppd[4104]: Couldn't increase MTU to 1500
Feb 21 22:55:21 fsdtest pppd[4104]: Couldn't increase MRU to 1500
Feb 21 22:55:21 fsdtest pppd[4104]: peer refused to authenticate: terminating link
Feb 21 22:55:21 fsdtest pppd[4104]: Couldn't increase MTU to 1500
Feb 21 22:55:21 fsdtest pppd[4104]: Couldn't increase MRU to 1500
Feb 21 22:55:21 fsdtest pppd[4104]: Connection terminated.
Feb 21 22:55:21 fsdtest pppd[4104]: Exit.
Feb 21 22:55:21 fsdtest pppoe-server[3429]: Session 1 closed for client 00:b0:d0:7e:1e:ca (192.168.2.100) on eth0
Feb 21 22:55:21 fsdtest pppoe-server[3429]: Sent PADT

regards

Posted: Fri Feb 22, 2008 10:06 am
by kbukhari
set mtu to 1492 pppoe uses this value

Posted: Fri Feb 22, 2008 10:40 am
by nasacis
i set but i am still getting this error

regards

Posted: Fri Feb 22, 2008 1:12 pm
by kbukhari
contact asim in your noc-lhr

he had the same issue and i guided him

Posted: Fri Feb 22, 2008 2:11 pm
by nasacis
can you guide me too ;)

regards

pppoe server HOWTO

Posted: Thu Apr 24, 2008 10:38 pm
by sarthor
As Salam O Alykum.

I check the link here
its for suse,
Is there any step by step help about pppoe server for ubuntu, i am using gutsy server,
i want, my users on my lan should dial the dialer like dialing DSL connection.

waiting...

As Salam O Alykum

Re: pppoe server HOWTO

Posted: Fri Apr 25, 2008 12:07 pm
by kbukhari
sarthor wrote:As Salam O Alykum.

I check the link here
its for suse,
Is there any step by step help about pppoe server for ubuntu, i am using gutsy server,
i want, my users on my lan should dial the dialer like dialing DSL connection.

waiting...

As Salam O Alykum


Dear Skandar
for running PPPoE mikrotik router OS is a good choice. its very easy and have ability to shape/control per ip and protocol based bandwidth.

Re: pppoe server HOWTO

Posted: Sun Apr 27, 2008 5:02 am
by sarthor
sarthor wrote:As Salam O Alykum.

I check the link here
its for suse,
Is there any step by step help about pppoe server for ubuntu, i am using gutsy server,
i want, my users on my lan should dial the dialer like dialing DSL connection.

waiting...

As Salam O Alykum


Salam O Alykum,

Any help regarding my quoted call,


Waiting ..
Salam O Alykum.

Re: pppoe server HOWTO

Posted: Mon Apr 28, 2008 12:47 pm
by kbukhari
sarthor wrote:
sarthor wrote:As Salam O Alykum.

I check the link here
its for suse,
Is there any step by step help about pppoe server for ubuntu, i am using gutsy server,
i want, my users on my lan should dial the dialer like dialing DSL connection.

waiting...

As Salam O Alykum


Salam O Alykum,

Any help regarding my quoted call,


Waiting ..
Salam O Alykum.

http://how2forge.org/linux_dialin_server
http://librenix.com/?inode=10176