Page 1 of 1

Problem installing REDHAT Linux 5 on Dual Core

Posted: Mon Nov 24, 2008 11:41 am
by hassandit
Salam, I use this configuration intel core 2 duo cpu e8200 2.66ghz system in my office. I have a problem to install linux in my system. 1st when i enter or type linux text on 1st screen then system hang on sum pci problem.

I resolve that problem for inserting "Linux pci=nommconf" at 1st screen, it works fine, after that when i select media type for installation it want driver either select cdrom or hard disk. I don't no why?

Please solve my problem I really want to install Linux on my system.

Thanks.

Re: Problem installing REDHAT Linux 5 on Dual Core

Posted: Mon Nov 24, 2008 2:38 pm
by LinuxFreaK
Dear hassandit,
Salam,

hassandit wrote:Salam, I use this configuration intel core 2 duo cpu e8200 2.66ghz system in my office. I have a problem to install linux in my system. 1st when i enter or type linux text on 1st screen then system hang on sum pci problem.

I resolve that problem for inserting "Linux pci=nommconf" at 1st screen, it works fine, after that when i select media type for installation it want driver either select cdrom or hard disk. I don't no why?

Please solve my problem I really want to install Linux on my system.


Are you using SATA or SCSI drives ?

Best Regards.

Posted: Mon Nov 24, 2008 3:25 pm
by hassandit
Salam, I use SATA drive and also use this command found during searching "Linux all-generic-ide noapic nolapic" which is not working when i use this "Linux pci=nommconf all-generic-ide noapic nolapic" its works and hang on /sbin/loder.

I don't know how I can install it.

:?:

Re:

Posted: Wed Nov 26, 2008 12:16 pm
by LinuxFreaK
Dear hassandit,
Salam,

Just use noapic and try again. I hope it will solve you problem.

Best Regards.