Page 1 of 1

Ubuntu 9.10 WorldCall evdo

Posted: Mon Feb 15, 2010 11:30 pm
by saquib_javed
Hi all,

Did anybody tried worldcall evdo on ubuntu 9.10 ???

I m not able to get the device detected as i m not getting an entry in lsusb

:(

:cry: :cry: :cry:

Posted: Tue Feb 16, 2010 5:03 pm
by lambda
you see that "google custom search" entry box at the top of the page? type "worldcall evdo" in it.

Posted: Wed Feb 17, 2010 10:31 am
by saquib_javed
Yeah tried that as well

here are my details

DMESG

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7b0000 (usable)
[    0.000000]  BIOS-e820: 000000007f7b0000 - 000000007f7c5400 (reserved)
[    0.000000]  BIOS-e820: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f7e7fb8 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7f7b0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f7b0000 (usable)
[    0.000000]  modified: 000000007f7b0000 - 000000007f7c5400 (reserved)
[    0.000000]  modified: 000000007f7c5400 - 000000007f7e7fb8 (ACPI NVS)
[    0.000000]  modified: 000000007f7e7fb8 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fed20000 - 00000000fed9a000 (reserved)
[    0.000000]  modified: 00000000feda0000 - 00000000fedc0000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 378a8000 - 37fefae2
[    0.000000] Allocated new RAMDISK: 008ad000 - 00ff4ae2
[    0.000000] Move RAMDISK from 00000000378a8000 - 0000000037fefae1 to 008ad000 - 00ff4ae1
[    0.000000] ACPI: RSDP 000fc600 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 7f7c81c4 00074 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: FACP 7f7c8084 000F4 (v04 HP     3618     00000003 HP   00000001)
[    0.000000] ACPI: DSDT 7f7c8348 12BC7 (v01 HP      nc6xxxs 00010000 MSFT 03000001)
[    0.000000] ACPI: FACS 7f7e7d80 00040
[    0.000000] ACPI: HPET 7f7c8238 00038 (v01 HP     3618     00000001 HP   00000001)
[    0.000000] ACPI: APIC 7f7c8270 00068 (v01 HP     3618     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 7f7c82d8 0003C (v01 HP     3618     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 7f7c8314 00032 (v02 HP     3618     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 7f7daf0f 0032A (v01 HP       HPQPAT 00000001 MSFT 03000001)
[    0.000000] ACPI: SSDT 7f7db239 0017D (v01 HP       HPQMRM 00000001 MSFT 03000001)
[    0.000000] ACPI: SSDT 7f7dbd3a 0025F (v01 HP      Cpu0Tst 00003000 INTL 20060317)
[    0.000000] ACPI: SSDT 7f7dbf99 000A6 (v01 HP      Cpu1Tst 00003000 INTL 20060317)
[    0.000000] ACPI: SSDT 7f7dc03f 004D7 (v01 HP        CpuPm 00003000 INTL 20060317)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00008a9000 - 00008ac148]              BRK ==> [00008a9000 - 00008ac148]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008ad000 - 0000ff4ae2]      NEW RAMDISK ==> [00008ad000 - 0000ff4ae2]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f7b0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f7b0
[    0.000000] On node 0 totalpages: 522059
[    0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2304 pages used for memmap
[    0.000000]   HighMem zone: 292530 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517979
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=a52ca279-de30-420e-ab8d-ac2043eb1fb6 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10443200 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f7b0)
[    0.000000] Memory: 2044528k/2088640k available (4565k kernel code, 42808k reserved, 2143k data, 540k init, 1179336k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575554 - 0xc078d308   (2143 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575554   (4565 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1795.791 MHz processor.
[    0.001265] Console: colour VGA+ 80x25
[    0.001269] console [tty0] enabled
[    0.001443] hpet clockevent registered
[    0.001447] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.001453] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.58 BogoMIPS (lpj=7183164)
[    0.001471] Security Framework initialized
[    0.001490] AppArmor: AppArmor initialized
[    0.001497] Mount-cache hash table entries: 512
[    0.001624] Initializing cgroup subsys ns
[    0.001629] Initializing cgroup subsys cpuacct
[    0.001633] Initializing cgroup subsys memory
[    0.001640] Initializing cgroup subsys freezer
[    0.001642] Initializing cgroup subsys net_cls
[    0.001656] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001659] CPU: L2 cache: 2048K
[    0.001662] CPU: Physical Processor ID: 0
[    0.001664] CPU: Processor Core ID: 0
[    0.001668] mce: CPU supports 6 MCE banks
[    0.001675] CPU0: Thermal monitoring handled by SMI
[    0.001678] using mwait in idle threads.
[    0.001685] Performance Counters: Core2 events, Intel PMU driver.
[    0.001694] ... version:                 2
[    0.001695] ... bit width:               40
[    0.001697] ... generic counters:        2
[    0.001699] ... value mask:              000000ffffffffff
[    0.001701] ... max period:              000000007fffffff
[    0.001703] ... fixed-purpose counters:  3
[    0.001704] ... counter mask:            0000000700000003
[    0.001708] Checking 'hlt' instruction... OK.
[    0.018535] ACPI: Core revision 20090521
[    0.044233] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083932] CPU0: Intel(R) Core(TM)2 Duo CPU     T5670  @ 1.80GHz stepping 0d
[    0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3590.98 BogoMIPS (lpj=7181977)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] mce: CPU supports 6 MCE banks
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.169556] CPU1: Intel(R) Core(TM)2 Duo CPU     T5670  @ 1.80GHz stepping 0d
[    0.169572] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.172023] Brought up 2 CPUs
[    0.172026] Total of 2 processors activated (7182.57 BogoMIPS).
[    0.172078] CPU0 attaching sched-domain:
[    0.172082]  domain 0: span 0-1 level MC
[    0.172085]   groups: 0 1
[    0.172091] CPU1 attaching sched-domain:
[    0.172093]  domain 0: span 0-1 level MC
[    0.172096]   groups: 1 0
[    0.172175] Booting paravirtualized kernel on bare hardware
[    0.172232] regulator: core version 0.5
[    0.172232] Time:  0:48:02  Date: 02/16/10
[    0.172232] NET: Registered protocol family 16
[    0.172232] EISA bus registered
[    0.172242] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.172245] ACPI: bus type pci registered
[    0.172320] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.172324] PCI: Not using MMCONFIG.
[    0.173393] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
[    0.173395] PCI: Using configuration type 1 for base access
[    0.176712] bio: create slab <bio-0> at 0
[    0.177445] ACPI: EC: Look up EC in DSDT
[    0.200020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.236136] ACPI: Interpreter enabled
[    0.236143] ACPI: (supports S0 S3 S4 S5)
[    0.236163] ACPI: Using IOAPIC for interrupt routing
[    0.236226] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.243042] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[    0.243044] PCI: Using MMCONFIG for extended config space
[    0.253202] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.253205] ACPI: EC: driver started in interrupt mode
[    0.253282] ACPI: Power Resource [C29B] (on)
[    0.253334] ACPI: Power Resource [C1C6] (off)
[    0.253434] ACPI: Power Resource [C3B2] (off)
[    0.253529] ACPI: Power Resource [C3B3] (off)
[    0.253626] ACPI: Power Resource [C3B4] (off)
[    0.253722] ACPI: Power Resource [C3B5] (off)
[    0.253817] ACPI: Power Resource [C3B6] (off)
[    0.254131] ACPI: No dock devices found.
[    0.258342] ACPI: PCI Root Bridge [C003] (0000:00)
[    0.258449] pci 0000:00:02.0: reg 10 64bit mmio: [0xe4400000-0xe44fffff]
[    0.258458] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[    0.258464] pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007]
[    0.258512] pci 0000:00:02.1: reg 10 64bit mmio: [0xe4500000-0xe45fffff]
[    0.258637] pci 0000:00:19.0: reg 10 32bit mmio: [0xe4600000-0xe461ffff]
[    0.258646] pci 0000:00:19.0: reg 14 32bit mmio: [0xe4620000-0xe4620fff]
[    0.258656] pci 0000:00:19.0: reg 18 io port: [0x4020-0x403f]
[    0.258713] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.258719] pci 0000:00:19.0: PME# disabled
[    0.258778] pci 0000:00:1a.0: reg 20 io port: [0x4040-0x405f]
[    0.258861] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4621000-0xe46213ff]
[    0.258933] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.258939] pci 0000:00:1a.7: PME# disabled
[    0.259000] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4624000-0xe4627fff]
[    0.259069] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.259074] pci 0000:00:1b.0: PME# disabled
[    0.259172] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.259177] pci 0000:00:1c.0: PME# disabled
[    0.259277] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.259283] pci 0000:00:1c.1: PME# disabled
[    0.259387] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.259393] pci 0000:00:1c.4: PME# disabled
[    0.259466] pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f]
[    0.259539] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[    0.259612] pci 0000:00:1d.2: reg 20 io port: [0x40a0-0x40bf]
[    0.259692] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4628000-0xe46283ff]
[    0.259763] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.259769] pci 0000:00:1d.7: PME# disabled
[    0.259956] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.259961] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[    0.259966] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[    0.259975] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[    0.260056] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.260065] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.260074] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0.260083] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.260092] pci 0000:00:1f.2: reg 20 io port: [0x40c0-0x40cf]
[    0.260101] pci 0000:00:1f.2: reg 24 io port: [0x40d0-0x40df]
[    0.260136] pci 0000:00:1f.2: PME# supported from D3hot
[    0.260141] pci 0000:00:1f.2: PME# disabled
[    0.260423] pci 0000:10:00.0: reg 10 32bit mmio: [0xe4000000-0xe4000fff]
[    0.260675] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[    0.260689] pci 0000:10:00.0: PME# disabled
[    0.260816] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4000000-0xe40fffff]
[    0.260891] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
[    0.260897] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[    0.260985] pci 0000:00:1e.0: transparent bridge
[    0.261028] pci_bus 0000:00: on NUMA node 0
[    0.261033] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[    0.261307] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B1._PRT]
[    0.261421] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11E._PRT]
[    0.261503] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
[    0.261592] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C135._PRT]
[    0.299262] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[    0.299479] ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
[    0.299693] ACPI: PCI Interrupt Link [C130] (IRQs 10 *11)
[    0.299897] ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled.
[    0.300117] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
[    0.300330] ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
[    0.300541] ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5
[    0.300640] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS 20090521 pci_link-182
[    0.300894] SCSI subsystem initialized
[    0.300904] libata version 3.00 loaded.
[    0.300904] usbcore: registered new interface driver usbfs
[    0.300904] usbcore: registered new interface driver hub
[    0.300904] usbcore: registered new device driver usb
[    0.300904] ACPI: WMI: Mapper loaded
[    0.300904] PCI: Using ACPI for IRQ routing
[    0.312009] Bluetooth: Core ver 2.15
[    0.312014] NET: Registered protocol family 31
[    0.312015] Bluetooth: HCI device and connection manager initialized
[    0.312018] Bluetooth: HCI socket layer initialized
[    0.312020] NetLabel: Initializing
[    0.312022] NetLabel:  domain hash size = 128
[    0.312024] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.312037] NetLabel:  unlabeled traffic allowed by default
[    0.312072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.312079] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.329601] pnp: PnP ACPI init
[    0.329612] ACPI: bus type pnp registered
[    0.338652] pnp: PnP ACPI: found 12 devices
[    0.338654] ACPI: ACPI bus type pnp unregistered
[    0.338659] PnPBIOS: Disabled by ACPI PNP
[    0.338669] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.338673] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.338676] system 00:00: iomem range 0x100000-0x7f7fffff could not be reserved
[    0.338687] system 00:09: ioport range 0x500-0x57f has been reserved
[    0.338690] system 00:09: ioport range 0x800-0x80f has been reserved
[    0.338694] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.338697] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
[    0.338704] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[    0.338707] system 00:0a: ioport range 0x1000-0x107f has been reserved
[    0.338710] system 00:0a: ioport range 0x1100-0x113f has been reserved
[    0.338713] system 00:0a: ioport range 0x1200-0x121f has been reserved
[    0.338716] system 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.338720] system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
[    0.338723] system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.338727] system 00:0a: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.338730] system 00:0a: iomem range 0xfed90000-0xfed99fff has been reserved
[    0.338736] system 00:0b: iomem range 0xcee00-0xcffff has been reserved
[    0.338739] system 00:0b: iomem range 0xd2000-0xd3fff has been reserved
[    0.338742] system 00:0b: iomem range 0xfeda0000-0xfedbffff has been reserved
[    0.338746] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.373417] AppArmor: AppArmor Filesystem Enabled
[    0.373477] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[    0.373480] pci 0000:00:1c.0:   IO window: disabled
[    0.373487] pci 0000:00:1c.0:   MEM window: disabled
[    0.373492] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.373498] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[    0.373500] pci 0000:00:1c.1:   IO window: disabled
[    0.373507] pci 0000:00:1c.1:   MEM window: 0xe4000000-0xe40fffff
[    0.373513] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.373518] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[    0.373523] pci 0000:00:1c.4:   IO window: 0x2000-0x3fff
[    0.373530] pci 0000:00:1c.4:   MEM window: 0xe0000000-0xe3ffffff
[    0.373535] pci 0000:00:1c.4:   PREFETCH window: disabled
[    0.373541] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.373543] pci 0000:00:1e.0:   IO window: disabled
[    0.373550] pci 0000:00:1e.0:   MEM window: disabled
[    0.373555] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.373570]   alloc irq_desc for 16 on node -1
[    0.373572]   alloc kstat_irqs on node -1
[    0.373578] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.373589] pci 0000:00:1c.0: setting latency timer to 64
[    0.373598]   alloc irq_desc for 17 on node -1
[    0.373600]   alloc kstat_irqs on node -1
[    0.373604] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.373610] pci 0000:00:1c.1: setting latency timer to 64
[    0.373620] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.373625] pci 0000:00:1c.4: setting latency timer to 64
[    0.373634] pci 0000:00:1e.0: setting latency timer to 64
[    0.373640] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.373643] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.373646] pci_bus 0000:10: resource 1 mem: [0xe4000000-0xe40fffff]
[    0.373649] pci_bus 0000:28: resource 0 io:  [0x2000-0x3fff]
[    0.373652] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff]
[    0.373655] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
[    0.373657] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[    0.373693] NET: Registered protocol family 2
[    0.373796] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.374140] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.374618] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.374851] TCP: Hash tables configured (established 131072 bind 65536)
[    0.374854] TCP reno registered
[    0.374927] NET: Registered protocol family 1
[    0.374993] Trying to unpack rootfs image as initramfs...
[    0.501576] Switched to high resolution mode on CPU 1
[    0.503971] Switched to high resolution mode on CPU 0
[    0.581618] Freeing initrd memory: 7454k freed
[    0.586282] cpufreq-nforce2: No nForce2 chipset.
[    0.586314] Scanning for low memory corruption every 60 seconds
[    0.586424] audit: initializing netlink socket (disabled)
[    0.586442] type=2000 audit(1266281282.585:1): initialized
[    0.595931] highmem bounce pool size: 64 pages
[    0.595936] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.597585] VFS: Disk quotas dquot_6.5.2
[    0.597654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.598254] fuse init (API version 7.12)
[    0.598347] msgmni has been set to 1706
[    0.598580] alg: No test for stdrng (krng)
[    0.598593] io scheduler noop registered
[    0.598595] io scheduler anticipatory registered
[    0.598598] io scheduler deadline registered
[    0.598650] io scheduler cfq registered (default)
[    0.598663] pci 0000:00:02.0: Boot video device
[    0.598921]   alloc irq_desc for 24 on node -1
[    0.598924]   alloc kstat_irqs on node -1
[    0.598937] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.598950] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.599109]   alloc irq_desc for 25 on node -1
[    0.599112]   alloc kstat_irqs on node -1
[    0.599121] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.599133] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.599301]   alloc irq_desc for 26 on node -1
[    0.599304]   alloc kstat_irqs on node -1
[    0.599313] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.599325] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.599439] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.599528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.603899] ACPI: AC Adapter [C23A] (on-line)
[    0.603965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.603969] ACPI: Power Button [PWRF]
[    0.604040] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.604043] ACPI: Sleep Button [C2B4]
[    0.604092] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    0.604160] ACPI: Lid Switch [C154]
[    0.604397] fan PNP0C0B:00: registered as cooling_device0
[    0.604404] ACPI: Fan [C3B7] (off)
[    0.604596] fan PNP0C0B:01: registered as cooling_device1
[    0.604603] ACPI: Fan [C3B8] (off)
[    0.604794] fan PNP0C0B:02: registered as cooling_device2
[    0.604800] ACPI: Fan [C3B9] (off)
[    0.604992] fan PNP0C0B:03: registered as cooling_device3
[    0.604999] ACPI: Fan [C3BA] (off)
[    0.605200] fan PNP0C0B:04: registered as cooling_device4
[    0.605207] ACPI: Fan [C3BB] (off)
[    0.605867] ACPI: SSDT 7f7db47e 0023D (v01 HP      Cpu0Ist 00003000 INTL 20060317)
[    0.606522] ACPI: SSDT 7f7db740 005FA (v01 HP      Cpu0Cst 00003001 INTL 20060317)
[    0.609177] Monitor-Mwait will be used to enter C-1 state
[    0.609205] Monitor-Mwait will be used to enter C-2 state
[    0.609214] Marking TSC unstable due to TSC halts in idle
[    0.609231] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    0.609253] processor LNXCPU:00: registered as cooling_device5
[    0.609257] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.609609] ACPI: SSDT 7f7db3b6 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20060317)
[    0.610080] ACPI: SSDT 7f7db6bb 00085 (v01 HP      Cpu1Cst 00003000 INTL 20060317)
[    0.611096] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    0.611118] processor LNXCPU:01: registered as cooling_device6
[    0.611123] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.619288] thermal LNXTHERM:01: registered as thermal_zone0
[    0.619298] ACPI: Thermal Zone [TZ3] (43 C)
[    0.631018] thermal LNXTHERM:02: registered as thermal_zone1
[    0.631027] ACPI: Thermal Zone [TZ4] (34 C)
[    0.634725] thermal LNXTHERM:03: registered as thermal_zone2
[    0.634734] ACPI: Thermal Zone [TZ5] (50 C)
[    0.651826] thermal LNXTHERM:04: registered as thermal_zone3
[    0.651835] ACPI: Thermal Zone [TZ0] (50 C)
[    0.655951] thermal LNXTHERM:05: registered as thermal_zone4
[    0.655960] ACPI: Thermal Zone [TZ1] (46 C)
[    0.656035] isapnp: Scanning for PnP cards...
[    0.711296] ACPI: Battery Slot [C23B] (battery present)
[    1.010404] isapnp: No Plug & Play device found
[    1.011718] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.013218] brd: module loaded
[    1.013718] loop: module loaded
[    1.013800] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    1.013912] ata_piix 0000:00:1f.2: version 2.13
[    1.013927] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.013934] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.168029] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.168110] scsi0 : ata_piix
[    1.168198] scsi1 : ata_piix
[    1.168865] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[    1.168868] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[    1.169817] Fixed MDIO Bus: probed
[    1.169854] PPP generic driver version 2.4.2
[    1.169940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.169960]   alloc irq_desc for 18 on node -1
[    1.169962]   alloc kstat_irqs on node -1
[    1.169968] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.169980] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    1.169984] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    1.170031] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.173930] ehci_hcd 0000:00:1a.7: debug port 1
[    1.173937] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    1.173954] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
[    1.188019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.188105] usb usb1: configuration #1 chosen from 1 choice
[    1.188137] hub 1-0:1.0: USB hub found
[    1.188145] hub 1-0:1.0: 4 ports detected
[    1.188206]   alloc irq_desc for 20 on node -1
[    1.188208]   alloc kstat_irqs on node -1
[    1.188213] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.188224] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.188228] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.188259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.192179] ehci_hcd 0000:00:1d.7: debug port 1
[    1.192186] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.192201] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
[    1.204019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.204085] usb usb2: configuration #1 chosen from 1 choice
[    1.204115] hub 2-0:1.0: USB hub found
[    1.204122] hub 2-0:1.0: 6 ports detected
[    1.204187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.204204] uhci_hcd: USB Universal Host Controller Interface driver
[    1.204228] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.204235] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.204239] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.204273] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.204311] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
[    1.204400] usb usb3: configuration #1 chosen from 1 choice
[    1.204428] hub 3-0:1.0: USB hub found
[    1.204435] hub 3-0:1.0: 2 ports detected
[    1.204489] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.204497] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.204501] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.204536] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.204565] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[    1.204648] usb usb4: configuration #1 chosen from 1 choice
[    1.204676] hub 4-0:1.0: USB hub found
[    1.204683] hub 4-0:1.0: 2 ports detected
[    1.204736]   alloc irq_desc for 21 on node -1
[    1.204738]   alloc kstat_irqs on node -1
[    1.204743] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.204750] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.204754] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.204785] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    1.204823] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[    1.204905] usb usb5: configuration #1 chosen from 1 choice
[    1.204934] hub 5-0:1.0: USB hub found
[    1.204940] hub 5-0:1.0: 2 ports detected
[    1.204995] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.205013] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.205017] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.205049] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    1.205079] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[    1.205162] usb usb6: configuration #1 chosen from 1 choice
[    1.205193] hub 6-0:1.0: USB hub found
[    1.205199] hub 6-0:1.0: 2 ports detected
[    1.205318] PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[    1.207239] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.207954] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.207960] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.207963] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.207967] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.207970] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.208041] mice: PS/2 mouse device common for all mice
[    1.208157] rtc_cmos 00:05: RTC can wake from S4
[    1.208191] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.208224] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.208328] device-mapper: uevent: version 1.0.3
[    1.208453] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.208547] device-mapper: multipath: version 1.1.0 loaded
[    1.208550] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.208674] EISA: Probing bus 0 at eisa.0
[    1.208681] Cannot allocate resource for EISA slot 1
[    1.208683] Cannot allocate resource for EISA slot 2
[    1.208685] Cannot allocate resource for EISA slot 3
[    1.208688] Cannot allocate resource for EISA slot 4
[    1.208707] EISA: Detected 0 cards.
[    1.208882] cpuidle: using governor ladder
[    1.208986] cpuidle: using governor menu
[    1.209525] TCP cubic registered
[    1.209693] NET: Registered protocol family 10
[    1.210193] lo: Disabled Privacy Extensions
[    1.210571] NET: Registered protocol family 17
[    1.210588] Bluetooth: L2CAP ver 2.13
[    1.210590] Bluetooth: L2CAP socket layer initialized
[    1.210593] Bluetooth: SCO (Voice Link) ver 0.6
[    1.210595] Bluetooth: SCO socket layer initialized
[    1.210633] Bluetooth: RFCOMM TTY layer initialized
[    1.210636] Bluetooth: RFCOMM socket layer initialized
[    1.210638] Bluetooth: RFCOMM ver 1.11
[    1.211177] Using IPI No-Shortcut mode
[    1.211240] PM: Resume from disk failed.
[    1.211253] registered taskstats version 1
[    1.211356]   Magic number: 14:958:809
[    1.211454] rtc_cmos 00:05: setting system clock to 2010-02-16 00:48:03 UTC (1266281283)
[    1.211457] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.211459] EDD information not available.
[    1.230260] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.348324] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100
[    1.348327] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.348363] ata1.01: ATAPI: HL-DT-ST DVDRAM GT20L, DC03, max UDMA/100
[    1.364342] ata1.00: configured for UDMA/100
[    1.380342] ata1.01: configured for UDMA/100
[    1.382800] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5
[    1.382923] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.384386] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.384432] sd 0:0:0:0: [sda] Write Protect is off
[    1.384435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.384458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.384583]  sda: sda1 sda2 <
[    1.386440] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GT20L     DC03 PQ: 0 ANSI: 5
[    1.386585]  sda5 sda6 sda7 sda8 >
[    1.454412] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.454416] Uniform CD-ROM driver Revision: 3.20
[    1.454486] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.454532] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.454631] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.454673] Freeing unused kernel memory: 540k freed
[    1.455033] Write protecting the kernel text: 4568k
[    1.455100] Write protecting the kernel read-only data: 1836k
[    1.500046] Clocksource tsc unstable (delta = -173776979 ns)
[    1.572824] Linux agpgart interface v0.103
[    1.575827] agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
[    1.576437] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    1.578943] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.580300] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    1.580304] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    1.580352]   alloc irq_desc for 22 on node -1
[    1.580354]   alloc kstat_irqs on node -1
[    1.580362] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.580368] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[    1.580374] e1000e 0000:00:19.0: setting latency timer to 64
[    1.580477]   alloc irq_desc for 27 on node -1
[    1.580480]   alloc kstat_irqs on node -1
[    1.580492] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[    1.637078] [drm] Initialized drm 1.1.0 20060810
[    1.714224] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:25:b3:47:21:21
[    1.714227] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[    1.714257] 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: ffffff-0ff
[    1.714312] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.714319] i915 0000:00:02.0: setting latency timer to 64
[    1.716545]   alloc irq_desc for 28 on node -1
[    1.716548]   alloc kstat_irqs on node -1
[    1.716559] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[    1.888040] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    2.063457] usb 3-1: configuration #1 chosen from 1 choice
[    2.178629] [drm] TV-14: set mode NTSC 480i 0
[    2.305324] [drm] fb0: inteldrmfb frame buffer device
[    2.308118] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    2.308943] acpi device:02: registered as cooling_device7
[    2.309604] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[    2.309632] ACPI: Video Device [C099] (multi-head: yes  rom: no  post: no)
[    2.309663] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.377256] [drm] LVDS-8: set mode 1280x800 17
[    2.482714] usb 4-2: configuration #1 chosen from 1 choice
[    2.571594] Initializing USB Mass Storage driver...
[    2.595548] Console: switching to colour frame buffer device 160x50
[    2.601682] scsi2 : SCSI emulation for USB Mass Storage devices
[    2.601821] usbcore: registered new interface driver usb-storage
[    2.601824] usb-storage: device found at 2
[    2.601826] usb-storage: waiting for device to settle before scanning
[    2.601831] USB Mass Storage support registered.
[    2.854059] PM: Starting manual resume from disk
[    2.854063] PM: Resume from partition 8:8
[    2.854065] PM: Checking hibernation image.
[    2.854258] PM: Resume from disk failed.
[    2.884262] EXT4-fs (sda7): barriers enabled
[    2.903857] kjournald2 starting: pid 436, dev sda7:8, commit interval 5 seconds
[    2.903872] EXT4-fs (sda7): delayed allocation enabled
[    2.903876] EXT4-fs: file extents enabled
[    2.907086] EXT4-fs: mballoc enabled
[    2.907100] EXT4-fs (sda7): mounted filesystem with ordered data mode
[    3.564101] type=1505 audit(1266281285.852:2): operation="profile_load" pid=459 name=/usr/share/gdm/guest-session/Xsession
[    3.581681] type=1505 audit(1266281285.869:3): operation="profile_load" pid=460 name=/sbin/dhclient3
[    3.582431] type=1505 audit(1266281285.869:4): operation="profile_load" pid=460 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    3.582833] type=1505 audit(1266281285.869:5): operation="profile_load" pid=460 name=/usr/lib/connman/scripts/dhclient-script
[    3.625444] type=1505 audit(1266281285.912:6): operation="profile_load" pid=461 name=/usr/bin/evince
[    3.636908] type=1505 audit(1266281285.924:7): operation="profile_load" pid=461 name=/usr/bin/evince-previewer
[    3.643658] type=1505 audit(1266281285.928:8): operation="profile_load" pid=461 name=/usr/bin/evince-thumbnailer
[    3.661073] type=1505 audit(1266281285.948:9): operation="profile_load" pid=463 name=/usr/lib/cups/backend/cups-pdf
[    4.424591] Adding 4192924k swap on /dev/sda8.  Priority:-1 extents:1 across:4192924k
[    4.841509] EXT4-fs (sda7): internal journal on sda7:8
[    4.881589] udev: starting version 147
[    8.585224] __ratelimit: 6 callbacks suppressed
[    8.585228] type=1505 audit(1266263290.872:12): operation="profile_replace" pid=889 name=/usr/share/gdm/guest-session/Xsession
[    8.587053] type=1505 audit(1266263290.872:13): operation="profile_replace" pid=890 name=/sbin/dhclient3
[    8.587790] type=1505 audit(1266263290.872:14): operation="profile_replace" pid=890 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    8.588222] type=1505 audit(1266263290.876:15): operation="profile_replace" pid=890 name=/usr/lib/connman/scripts/dhclient-script
[    8.592009] type=1505 audit(1266263290.876:16): operation="profile_replace" pid=891 name=/usr/bin/evince
[    8.603662] type=1505 audit(1266263290.888:17): operation="profile_replace" pid=891 name=/usr/bin/evince-previewer
[    8.610991] type=1505 audit(1266263290.896:18): operation="profile_replace" pid=891 name=/usr/bin/evince-thumbnailer
[    8.620716] type=1505 audit(1266263290.908:19): operation="profile_replace" pid=895 name=/usr/lib/cups/backend/cups-pdf
[    8.621590] type=1505 audit(1266263290.908:20): operation="profile_replace" pid=895 name=/usr/sbin/cupsd
[    8.624154] type=1505 audit(1266263290.912:21): operation="profile_replace" pid=896 name=/usr/sbin/tcpdump
[    8.909280] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[    8.965113] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[    8.965388] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.133230] lp: driver loaded but no devices found
[    9.746069] Bluetooth: Generic Bluetooth USB driver ver 0.5
[    9.746195] usbcore: registered new interface driver btusb
[    9.821094] cfg80211: Calling CRDA to update world regulatory domain
[   10.006896] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   10.006908] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.006938] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.320639] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000
[   10.360607] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[   10.380065] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   10.417312] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.157565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.157569] Bluetooth: BNEP filters: protocol multicast
[   11.204019] Bridge firewalling registered
[   12.613861] cfg80211: World regulatory domain updated:
[   12.613865]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.613869]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.613872]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.613874]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.613877]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.613880]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.256030] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x006b8000
[   13.346667] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   13.346671] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   13.346793] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.346809] iwl3945 0000:10:00.0: setting latency timer to 64
[   13.417467] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[   13.417471] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   13.417596]   alloc irq_desc for 29 on node -1
[   13.417599]   alloc kstat_irqs on node -1
[   13.417632] iwl3945 0000:10:00.0: irq 29 for MSI/MSI-X
[   13.426930] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   13.524460] iwl3945 0000:10:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   13.539883] iwl3945 0000:10:00.0: loaded firmware version 15.32.2.9
[   13.616109] Registered led device: iwl-phy0::radio
[   13.616132] Registered led device: iwl-phy0::assoc
[   13.616151] Registered led device: iwl-phy0::RX
[   13.616171] Registered led device: iwl-phy0::TX
[   13.636973] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.847536] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   13.847539] vboxdrv: Successfully done.
[   13.847541] vboxdrv: Found 2 processor cores.
[   13.847657] vboxdrv: fAsync=0 offMin=0x1b0 offMax=0x2505
[   13.847701] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   13.847703] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
[   14.436430] ppdev: user-space parallel port driver
[   14.885191] [drm] TV-14: set mode NTSC 480i 0
[   15.025289] [drm] TV-14: set mode NTSC 480i 0
[   15.455010] [drm] TV-14: set mode NTSC 480i 0
[   15.595375] [drm] TV-14: set mode NTSC 480i 0
[   20.903330] [drm] TV-14: set mode NTSC 480i 0
[   21.043493] [drm] TV-14: set mode NTSC 480i 0
[   21.308378] [drm] TV-14: set mode NTSC 480i 0
[   21.448818] [drm] TV-14: set mode NTSC 480i 0
[   21.731040] [drm] TV-14: set mode NTSC 480i 0
[   21.871395] [drm] TV-14: set mode NTSC 480i 0
[   23.821063] CE: hpet increasing min_delta_ns to 15000 nsec
[   34.253153] [drm] TV-14: set mode NTSC 480i 0
[   34.393113] [drm] TV-14: set mode NTSC 480i 0
[   34.687398] [drm] TV-14: set mode NTSC 480i 0
[   34.827901] [drm] TV-14: set mode NTSC 480i 0
[   35.099016] [drm] TV-14: set mode NTSC 480i 0
[   35.239561] [drm] TV-14: set mode NTSC 480i 0


LSUSB

Code: Select all

Bus 004 Device 002: ID 05c6:1000 Qualcomm, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub



So what i came to know that my device is this

Code: Select all

Bus 004 Device 002: ID 05c6:1000 Qualcomm, Inc.


any more hints lamdba

????

Posted: Wed Feb 17, 2010 1:56 pm
by lambda
did a new cdrom device appear? did you eject it? do you see /dev/ttyUSB0 or /dev/ttyACM0?

Posted: Wed Feb 17, 2010 2:29 pm
by saquib_javed
nops nothing appears

when i insert the device only power led comes on and there is no idle or busy led

but my dmesg says that

Code: Select all

[10440.449129] usb 4-2: new full speed USB device using uhci_hcd and address 2
[10440.615350] usb 4-2: configuration #1 chosen from 1 choice
[10441.866462] Initializing USB Mass Storage driver...
[10444.872146] scsi2 : SCSI emulation for USB Mass Storage devices
[10444.872350] usbcore: registered new interface driver usb-storage
[10444.872354] USB Mass Storage support registered.
[10444.873165] usb-storage: device found at 2
[10444.873167] usb-storage: waiting for device to settle before scanning
[10459.874438] usb-storage: device scan complete
[10462.992071] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[10463.118976] usb 4-2: device descriptor read/64, error -71
[10463.344075] usb 4-2: device descriptor read/64, error -71
[10463.565840] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[10463.688067] usb 4-2: device descriptor read/64, error -71
[10463.925839] usb 4-2: device descriptor read/64, error -71
[10464.141143] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[10464.562679] usb 4-2: device not accepting address 2, error -71
[10464.672079] usb 4-2: reset full speed USB device using uhci_hcd and address 2
[10465.089068] usb 4-2: device not accepting address 2, error -71
[10465.089153] usb 4-2: USB disconnect, address 2
[10465.204089] usb 4-2: new full speed USB device using uhci_hcd and address 3
[10465.329076] usb 4-2: device descriptor read/64, error -71
[10465.553114] usb 4-2: device descriptor read/64, error -71
[10465.769133] usb 4-2: new full speed USB device using uhci_hcd and address 4
[10465.892096] usb 4-2: device descriptor read/64, error -71
[10466.120080] usb 4-2: device descriptor read/64, error -71
[10466.336097] usb 4-2: new full speed USB device using uhci_hcd and address 5
[10466.756066] usb 4-2: device not accepting address 5, error -71
[10466.868121] usb 4-2: new full speed USB device using uhci_hcd and address 6
[10467.284079] usb 4-2: device not accepting address 6, error -71
[10467.284116] hub 4-0:1.0: unable to enumerate USB device on port 2

Posted: Thu Feb 18, 2010 4:04 pm
by saquib_javed
so

whats happening there

is my device not detected there or there us something else going on in debian/ubuntu ???

or shall i switch to any distro

but i would really like to stick to ubuntu as it works perfectly with my laptop

Posted: Sat Feb 20, 2010 5:40 pm
by saquib_javed
hellooooooo

anybody there or no one is using it with ubuntu

Posted: Sat Feb 20, 2010 10:03 pm
by lambda
what do you expect ubuntu users to do? go out and buy an evdo device to help you?

Posted: Sun Feb 21, 2010 12:59 pm
by saquib_javed
nop

i wont advise anybody

as the worldcall support is also not good

Posted: Sun Feb 21, 2010 9:44 pm
by Muhammad Saad
Do you always get read error even when using different USB ports?

Posted: Mon Feb 22, 2010 3:43 pm
by saquib_javed
yes

i still donno y its doing it

also tried the usb_modeswitch as well but still no success

am downloading the kernel source; so leme chk dat as well

Posted: Fri Feb 26, 2010 10:51 am
by saquib_javed
okay

this might sound like crap but its happening

i downgraded to ubuntu 8.10 and yes the device was detected as a player/mmc storage

i ejected it with

Code: Select all

eject /dev/sr1
and then the /dev/ttyUSB0 GSM modem appears

i started the kppp but the response of ati commands was nothing

will try it with minicom

Posted: Tue Mar 09, 2010 3:27 pm
by saquib_javed
done it

downloaded slax

installed it on usb

inserted the device

ejected the /dev/sr1

start kppp

use the /dev/ttyUSB0 as mode

and happy evdoingggggg :D