A-O-A
HI I M STARBOY NEWBIE HERE WELL I JUST WANA USE INTERNET ON LINUX MANDRAKE PLATE FORM THERE IS ONE COMPUTER WINDOWS98 AND HAVING MODEM TOO WELL WE HAVE SMALL NETWORK ALL OTHER SYSTEM ARE USING WIN98 EXCEPT ME DONT ADVISE ME TO USE WINDOWS AS I DONT WANA USE IT WELL A COMPUTER WHICH AHVE MODEM ECTUALLY WE ARE USING INTERNET BY WINPROXY AND I CAN EASILY CONFIGURE WINDOWS SYSTEM TO USE INTERNET BUT I WANA USE IT ON LINUX PLATE FORM AND DONT KNOW HOW TO USE IT I'VE READ MANY DOCUMENTATION REGARDING MY PROBLEM BUT DIDN'T GET ANY THING RELEVENT MY PROBLEM SO THEY MENTION SAMAB AND LIKE THIS STUFF I DONAT WANA SHARE ANY THING BUT JUST WANA USE INTERNET I THINK MY LAN CARD IS ALSO DETECTED I M SURE AND IT IS INSTALLED WELL HOW BUT WHEN I START COMPUTER ITS GIVES MESSAGE THAT "BRINGING ETH0 INTERFACE FAILED" LIKE THIS SO HOW CAN I USE IT PLZ HELP ME I'LL BE VERY THANK FULL TO U IF U GUIDE ME STEP BY STEP ..REGARD............STARBOY
HOW CAN I COMMUNICATE WITH WINDOWS BY USING LINUX MANDRAKE.?
-
- Site Admin
- Posts: 5132
- Joined: Fri May 02, 2003 10:24 am
- Location: Karachi
- Contact:
Re:
Dear Startboy,
Salam,
Best Regards.
Salam,
Sir, 1st of all i would like to say never post your message in Capital Letters. and 2ndly can you please tell us which Version of Mandrak you are using and which NIC Card you have ? also refer to http://www.linuxpakistan.net/forum2x/vi ... .php?t=762starboy wrote:A-O-A
HI I M STARBOY NEWBIE HERE WELL I JUST WANA USE INTERNET ON LINUX MANDRAKE PLATE FORM THERE IS ONE COMPUTER WINDOWS98 AND HAVING MODEM TOO WELL WE HAVE SMALL NETWORK ALL OTHER SYSTEM ARE USING WIN98 EXCEPT ME DONT ADVISE ME TO USE WINDOWS AS I DONT WANA USE IT WELL A COMPUTER WHICH AHVE MODEM ECTUALLY WE ARE USING INTERNET BY WINPROXY AND I CAN EASILY CONFIGURE WINDOWS SYSTEM TO USE INTERNET BUT I WANA USE IT ON LINUX PLATE FORM AND DONT KNOW HOW TO USE IT I'VE READ MANY DOCUMENTATION REGARDING MY PROBLEM BUT DIDN'T GET ANY THING RELEVENT MY PROBLEM SO THEY MENTION SAMAB AND LIKE THIS STUFF I DONAT WANA SHARE ANY THING BUT JUST WANA USE INTERNET I THINK MY LAN CARD IS ALSO DETECTED I M SURE AND IT IS INSTALLED WELL HOW BUT WHEN I START COMPUTER ITS GIVES MESSAGE THAT "BRINGING ETH0 INTERFACE FAILED" LIKE THIS SO HOW CAN I USE IT PLZ HELP ME I'LL BE VERY THANK FULL TO U IF U GUIDE ME STEP BY STEP ..REGARD............STARBOY
Best Regards.
Farrukh Ahmed
assalam -o- aleikum
thanks a lot that u took few moments to read and reply my post.
well i m using linux mandrake version 7.1 and my NIC is realtek and its model is RTL8139.
in the netconfiguration there is inserted its kernel module with the name of rtl8139 and device = eth0
i give its ip address which is 192.168.0.108
a computer which have modem and winproxy loded, its ip address is 192.168.0.131
now what should i do in order to use internet by using linux. in windows i know how to do but in linux..................i dont know well when my computer boots its show message that dhcp client not found or valid like this coz booting speed is very fast so i m unable to read it quickly but its show "FAILED" i need ur help kindly tell me step by step i'll be very thank full to u .................Regard,
NOTE: now i didn't use caps
well i m using linux mandrake version 7.1 and my NIC is realtek and its model is RTL8139.
in the netconfiguration there is inserted its kernel module with the name of rtl8139 and device = eth0
i give its ip address which is 192.168.0.108
a computer which have modem and winproxy loded, its ip address is 192.168.0.131
now what should i do in order to use internet by using linux. in windows i know how to do but in linux..................i dont know well when my computer boots its show message that dhcp client not found or valid like this coz booting speed is very fast so i m unable to read it quickly but its show "FAILED" i need ur help kindly tell me step by step i'll be very thank full to u .................Regard,
NOTE: now i didn't use caps
STARBOY
-
- Site Admin
- Posts: 5132
- Joined: Fri May 02, 2003 10:24 am
- Location: Karachi
- Contact:
Re: assalam -o- aleikum
Dear Starboy,
Salam,
I donno If you are assigning the IP to eth0 then why you use DHCP in your Linux.For DHCP refer to DHCP mini-HOWTO and for RealTec NICyou must read that link which i provide you in my last post..and for Browsing Web Browsing Behind ISA Server - HOW-TO.. and thanks for not wrting your message in capital letters...
Salam,
I donno If you are assigning the IP to eth0 then why you use DHCP in your Linux.For DHCP refer to DHCP mini-HOWTO and for RealTec NICyou must read that link which i provide you in my last post..and for Browsing Web Browsing Behind ISA Server - HOW-TO.. and thanks for not wrting your message in capital letters...
Best Regards.starboy wrote:thanks a lot that u took few moments to read and reply my post.
well i m using linux mandrake version 7.1 and my NIC is realtek and its model is RTL8139.
in the netconfiguration there is inserted its kernel module with the name of rtl8139 and device = eth0
i give its ip address which is 192.168.0.108
a computer which have modem and winproxy loded, its ip address is 192.168.0.131
now what should i do in order to use internet by using linux. in windows i know how to do but in linux..................i dont know well when my computer boots its show message that dhcp client not found or valid like this coz booting speed is very fast so i m unable to read it quickly but its show "FAILED" i need ur help kindly tell me step by step i'll be very thank full to u .................Regard,
NOTE: now i didn't use caps
Farrukh Ahmed
salam and thanks
well i m very very very thank full to u LinuxFreak that u direct me such a cute and informative links well i realy get lot of things from there now i m able to use internet via proxy u r so so so nice i get lot of information by reading these links. sir believe me i m very happy and thanks again. now sir i wana use msn messenger in linux is it possible if yes then from where i can get msn messeger for linux and how to install it for use i'll be very thank full to hope u'll reply me and bundle of thanks again......
with best regard,.starboy
with best regard,.starboy
STARBOY
-
- Major General
- Posts: 917
- Joined: Thu Jun 27, 2002 5:45 pm
- Location: Karachi
- Contact:
Yes you can use msn at linux by using a very cute opensource client for msn name amsn. you can download this from amsn.sourceforge.net. Using amsn is as simple as 123, just extract the compressed file and execute amsn.
A: Yes
Q: Is top-posting bad?
Q: Is top-posting bad?
-
- Site Admin
- Posts: 5132
- Joined: Fri May 02, 2003 10:24 am
- Location: Karachi
- Contact:
Re:
Dear Starboy,
Salam,
Best Regards.
Salam,
You are welcome any time..... aMSN and there are lots of projects take a look at SourceForge.Net and Freshmeat.Netfarhantoqeer wrote:Yes you can use msn at linux by using a very cute opensource client for msn name amsn. you can download this from amsn.sourceforge.net. Using amsn is as simple as 123, just extract the compressed file and execute amsn.
Best Regards.
Farrukh Ahmed
thanks
well thanks both of u that u direct me such cute links i've dowloaded amsn but now i wana fix one problem here when i run ./amsn or wish amsn it show that i've to install tcl/tk latest version
ok aight i downloded tcl and tk both but when i run ./configure after untar or gunzip it show that no gcc is valid i mean theree is no gcc command what should i've to do now so i could use msn messenger??? plzzzzzz bear me once more and help me.....regard,
ok aight i downloded tcl and tk both but when i run ./configure after untar or gunzip it show that no gcc is valid i mean theree is no gcc command what should i've to do now so i could use msn messenger??? plzzzzzz bear me once more and help me.....regard,
STARBOY
-
- Major General
- Posts: 1024
- Joined: Thu Jul 04, 2002 5:31 pm
- Location: Karachi/Pakistan/Earth/Universe
Re: thanks
This question has already been answered on the forum.
http://www.linuxpakistan.net/forum2x/vi ... hlight=tls
Check the third last reply (By outstream)
It will explain you how to download tls, and put the files in the appropriate directories and run amsn.
I am not explaining it again, since it has already been explained, and is really simple.
If you got a problem, let us know.
Good luck!
http://www.linuxpakistan.net/forum2x/vi ... hlight=tls
Check the third last reply (By outstream)
It will explain you how to download tls, and put the files in the appropriate directories and run amsn.
I am not explaining it again, since it has already been explained, and is really simple.
If you got a problem, let us know.
Good luck!
starboy wrote:well thanks both of u that u direct me such cute links i've dowloaded amsn but now i wana fix one problem here when i run ./amsn or wish amsn it show that i've to install tcl/tk latest version
ok aight i downloded tcl and tk both but when i run ./configure after untar or gunzip it show that no gcc is valid i mean theree is no gcc command what should i've to do now so i could use msn messenger??? plzzzzzz bear me once more and help me.....regard,
Linux for Life!