Linux box eth1 chocking

[hyperlinux]

Assalam u Alaikum
dear brothers i have a problem i have Linux box having 2 NIC that is eth0 or eth1. eth0 is external and eth1 is local, now the problem is that eth1 is chocking and when i restart the network service it give the error line too much interrupts or when i manually restart the ifconfig eth1 down and up it gives the same error and nothing could running properly unless until i restart the Linux server. . . . . . . . . can any buddy give me the solution for this i think this is for broadcasting on the network and how to control it?

[LinuxFreaK]

Dear hyperlinux,
Salam,

Which Ethernet cards you are using ?

Best Regards.

[hyperlinux]

Dear Farukh i use the RTL for local lan and 3Com for external which have live ip. . . . . .

[zAm]

Dear , hyperlinux
what ethernet cards u'r using currently ? might be 10 base T 10/100 Mbps , right ? if it is so then you can switch is to gigabit lan's , it would probably solve your problem .. that problem occurs in our network too ..... replacing the Ethernet to Gigabyte solves our problem ...
try this one !
Regards,
zAm (Lyarianz Internet Cable Network)

[hyperlinux]

Dear Lyarianz Assalam u Alaikum
i use the 10/100 mbps NIC or swithes in my network but i didnt use any device that having gbit speed like cable or switch or NIC if the lancard is gbit and the swithc is 100 mpbs it dosent mattar unless untell the switch is too gbit. . . .
if u have the script to controling the uplink or broadcast then tell me. . .
thnx for reply


Regards
M.Amir