i need to config a old machine as a router and squid..so wt

Taking care of your Linux box.
farhanksa
Subedar
Posts: 359
Joined: Sun Nov 03, 2002 6:40 am
Location: Lahore
Contact:

i need to config a old machine as a router and squid..so wt

Postby farhanksa » Wed May 21, 2003 2:50 am

aoa

i got an old p1 mother board..i need to configure the box as a router and squid.. so wt do u preffer ..which processor i whould use with i t

its socket 7 M.B can support 233mhz intel (256 kb cache)

450 mhz AMd K6/II (64 kb cache)
so which processor u suggesst that i should use
it got 64 mb simm ram

if
Battalion Quarter Master Havaldaar
Posts: 224
Joined: Tue Aug 13, 2002 12:52 pm
Location: Islamabad
Contact:

Re: i need to config a old machine as a router and squid..so

Postby if » Wed May 21, 2003 8:47 am

Aslam-o-Aliakum,

farhanksa wrote:aoa
i got an old p1 mother board..i need to configure the box as a router and squid.. so wt do u preffer ..which processor i whould use with i t

its socket 7 M.B can support 233mhz intel (256 kb cache)

450 mhz AMd K6/II (64 kb cache)
so which processor u suggesst that i should use
it got 64 mb simm ram


As u say... P-I motherboard (i don't know about the brand of that mother board but normally) which mean... it doesn't support Processors Intel P-I (greater than 233Mhz) or C3 (greater than 300Mhz) or AMD (greater than 266 Mhz)...

therefore i suggest u to assemble 233Mhz Intel... and second option which 450Mhz AMD it' can be configured on 450Mhz Clock (which i think so because it's P-I motherboard if it is :lol: ) but it can be configured on 300Mhz Clock and better approach is that u need Socket 7 motherboard which support C3 400Mhz or AMD K-6/2... and then :P
if u find anything which shows my lack of knowledge,
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if


Return to “Administration”

Who is online

Users browsing this forum: No registered users and 0 guests