Making a modem dialup connection in text mode

General discussion about PLUC and Linux in Pakistan.

Making a modem dialup connection in text mode

Postby turab » Thu Mar 23, 2006 9:42 pm

Hello Friends,
when i make dialup connection in Redhat gui mode i works fine, and when i tried to make it in plain text mode it do not work, Could you please guide me how do i make a dialup connection in plain text mode without using redhat-config-network-tui command.

Thanks in advance.
turab
Company Havaldaar Major
 
Posts: 154
Joined: Thu Dec 15, 2005 3:36 pm
WLM: iba_lookz@hotmail.com
Yahoo Messenger: turabali@yahoo.com

Re:

Postby LinuxFreaK » Fri Mar 24, 2006 9:02 am

Farrukh Ahmed
LinuxFreaK
Site Admin
 
Posts: 5132
Joined: Fri May 02, 2003 10:24 am
ICQ: 82075802
Website: http://www.linuxpakistan.net/wiki/index.php?pagename=LinuxFreak
WLM: f4fahmed@hotmail.com
Yahoo Messenger: f4fahmed@yahoo.com
AOL: linuxpakistan@aol.com
Location: Karachi

Postby usamahashimi » Fri Mar 24, 2006 11:42 am

Hi
Are you trying to connect via wvdial? If so (and wvdialconf is not configuring your modem), creat a file /etc/wvdial.conf and paste the following lines, there;
[Dialer Defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = your_ISP_dialup_number
Username = your_ISP_username
Password = your_ISP_password
#Ask Password = 1
Stupid Mode = 1

Assuming that your modem is at /dev/modem and dont forget to change the dialup, ISP username and ISP password :) in these lines. Also dont forget to install wvdial :)
Thanks
usamahashimi
 


Return to “%s” General

Who is online

Users browsing this forum: No registered users and 2 guests

cron