FXO/FXS port for Ambient MD3200 voice modem

Discussion regarding the installation and configuration of Linux distributions.

FXO/FXS port for Ambient MD3200 voice modem

Postby numan82 » Thu Aug 02, 2007 5:51 pm

Dear Brothers,
I've Ambient MD3200 card and I am using it both as FXO/FXS channel. The Probelm that I am having is that in /etc/zaptel.conf
I assigned as
fxoks=1
fxsks=2
loadzone=us
defaultzone=us
but they they are giving errors as shown below
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
Changing signalling on channel 1 from FXS Kewlstart to FXO Kewlstart

ZT_CHANCONFIG failed on channel 1: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?

if any one experienced the same problem or having knowledge to overcome this problem,please share your knowledge
Thanks!
numan82
Lance Naik
 
Posts: 19
Joined: Wed Aug 01, 2007 10:29 am
Website: http://www.yzcorppk.com/~numan
Location: San Jose CA United States

Re:

Postby LinuxFreaK » Fri Aug 03, 2007 8:52 am

Dear numan82,
Salam,

Do not post duplicate posts.

FYI, http://www.linuxpakistan.net/forum2x/vi ... php?t=7234

Best Regards.
Farrukh Ahmed
LinuxFreaK
Site Admin
 
Posts: 5132
Joined: Fri May 02, 2003 10:24 am
ICQ: 82075802
Website: http://www.linuxpakistan.net/wiki/index.php?pagename=LinuxFreak
WLM: f4fahmed@hotmail.com
Yahoo Messenger: f4fahmed@yahoo.com
AOL: linuxpakistan@aol.com
Location: Karachi


Return to “%s” Installation

Who is online

Users browsing this forum: No registered users and 3 guests

cron