tcl problem in amsn 0.83 (new)
tcl problem in amsn 0.83 (new)
Hi Guys
i downloaded new amsn version 0.83, For this version it was written on amsn.sourceforge.net that it works after 15th october too. i installed it successfully but now when i try to run it , it says it needs to have tsl to get connected. and it says my system lacks tsll. after this i downloaded the source for tls from tls.sf.net and installed it. but still its giving the same error. Has any one tried this new version and has any one tried connecting it using msn protocol 9?.
Thanks for ur precious time
Good Day
i downloaded new amsn version 0.83, For this version it was written on amsn.sourceforge.net that it works after 15th october too. i installed it successfully but now when i try to run it , it says it needs to have tsl to get connected. and it says my system lacks tsll. after this i downloaded the source for tls from tls.sf.net and installed it. but still its giving the same error. Has any one tried this new version and has any one tried connecting it using msn protocol 9?.
Thanks for ur precious time
Good Day
Testing?What's that? If it compiles, its good, if it boots up it is perfect.
----------------------------------------------------
Imran
Registered Linux User # 334322
----------------------------------------------------
Imran
Registered Linux User # 334322
-
- Major General
- Posts: 917
- Joined: Thu Jun 27, 2002 5:45 pm
- Location: Karachi
- Contact:
AoA
yaar i am just a newbie and dont know much. its like when i try to sign in it says its tcl problem and when i go to recommended site by it, it says download tls. i dont know whats going on. i am counting on u guys to help me outta this problem.
Thanks for ur precious time
Good Day
yaar i am just a newbie and dont know much. its like when i try to sign in it says its tcl problem and when i go to recommended site by it, it says download tls. i dont know whats going on. i am counting on u guys to help me outta this problem.
Thanks for ur precious time
Good Day
Testing?What's that? If it compiles, its good, if it boots up it is perfect.
----------------------------------------------------
Imran
Registered Linux User # 334322
----------------------------------------------------
Imran
Registered Linux User # 334322
-
- Lieutenant Colonel
- Posts: 660
- Joined: Sat Jul 06, 2002 12:35 pm
- Location: Islamabad
- Contact:
As far as my understanding of linux goes TLS stands for Transport Layer Security and is a protocol for delivering packets securely blah blah blah... while tcl is the scripting language in linux that i am a bit familiar with. so the conclusion is
tls= transport
tcl=scripting
can u kindly point out the exact error message it says and also which distribution are you running.
regards
zaeem
tls= transport
tcl=scripting
can u kindly point out the exact error message it says and also which distribution are you running.
regards
zaeem
-
- Major General
- Posts: 917
- Joined: Thu Jun 27, 2002 5:45 pm
- Location: Karachi
- Contact:
amsn newly released verson asked me to download tls libraries and i went through the download process cleanly, amsn does iteslf for me. download amsn0.83 stable version from http://amsn.sourcforge.net
AoA
yaar the problem is, after putting my user name and password when i press ok to login, it gives me a dialogue box which tells me i have to download and install a module called TSL. at this time the option of linux-x86 installation is highlighted. when i press ok, nothing happens, it doesnt starts downloading anything, inface it give me an error screen saying "Cant Read "TOK" no such variable". and after this nothing happens.
I downloaded the tsl library and gave the path in preferences -> application. but still nothing happened. After that i download tsl in source form and tried to install it but it didnt get installed, cuz it fails to find a directory /usr/load/openssl.
Can u check in ur preferences -> application , in amsn that what path has it given there?. its very strange that nothing happens when i allow it to download and install tsl, itself.
There is another strange problem i am getting that nothing downloads when i use mozilla or konquoror. i am only able to download anything using galeon.
Thanks for ur precious time
Good Day
yaar the problem is, after putting my user name and password when i press ok to login, it gives me a dialogue box which tells me i have to download and install a module called TSL. at this time the option of linux-x86 installation is highlighted. when i press ok, nothing happens, it doesnt starts downloading anything, inface it give me an error screen saying "Cant Read "TOK" no such variable". and after this nothing happens.
I downloaded the tsl library and gave the path in preferences -> application. but still nothing happened. After that i download tsl in source form and tried to install it but it didnt get installed, cuz it fails to find a directory /usr/load/openssl.
Can u check in ur preferences -> application , in amsn that what path has it given there?. its very strange that nothing happens when i allow it to download and install tsl, itself.
There is another strange problem i am getting that nothing downloads when i use mozilla or konquoror. i am only able to download anything using galeon.
Thanks for ur precious time
Good Day
Testing?What's that? If it compiles, its good, if it boots up it is perfect.
----------------------------------------------------
Imran
Registered Linux User # 334322
----------------------------------------------------
Imran
Registered Linux User # 334322
-
- Major General
- Posts: 917
- Joined: Thu Jun 27, 2002 5:45 pm
- Location: Karachi
- Contact:
-
- Battalion Quarter Master Havaldaar
- Posts: 224
- Joined: Tue Aug 13, 2002 12:52 pm
- Location: Islamabad
- Contact:
Aslam-o-Aliakum,
I install AMSN but i don't find any problem (TSL)
I sugget dear... to use Kopete (it' s newer version 0.7.3) it's good... approx 4 MB of Source Code... download it and compile it... i hope u like it... and find better than AMSN
I install AMSN but i don't find any problem (TSL)
I sugget dear... to use Kopete (it' s newer version 0.7.3) it's good... approx 4 MB of Source Code... download it and compile it... i hope u like it... and find better than AMSN
if u find anything which shows my lack of knowledge,
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
-
- Major General
- Posts: 917
- Joined: Thu Jun 27, 2002 5:45 pm
- Location: Karachi
- Contact:
AoA
yaar yehi tow problem hai...i have been checking other forums too and it just works fine with every one...but not me..what do u suggest?..shall i give up?
yaar yehi tow problem hai...i have been checking other forums too and it just works fine with every one...but not me..what do u suggest?..shall i give up?
Testing?What's that? If it compiles, its good, if it boots up it is perfect.
----------------------------------------------------
Imran
Registered Linux User # 334322
----------------------------------------------------
Imran
Registered Linux User # 334322
AoA
Ok Guys i have got the solution myself..just posting it here incase if some one else comes across the same problem, they can get idea about how to solve it.
I downloaded tls llibraries manually from sourceforge.net. after this i extracted them to /home/amsn/plugins/ (this is the locaiton of amsn and /plugin directory on my machine). after extracting it became some thing like /home/amsn/plugins/tls1.4 .
the files in /tls1.4 looked like this
libtls.1.4.so
pkglindex.tsl
tls.tcl
okay after extracting, i restarted amsn and still it didnt work. this time it said "host unreacheable". Then i went to preferences -> application in amsn and gave the path of tsl libraries i.e /home/amsn/plugins/tls1.4. Then i restarted amsn again and it worked.
Now its working all fine and good
Good Day
Ok Guys i have got the solution myself..just posting it here incase if some one else comes across the same problem, they can get idea about how to solve it.
I downloaded tls llibraries manually from sourceforge.net. after this i extracted them to /home/amsn/plugins/ (this is the locaiton of amsn and /plugin directory on my machine). after extracting it became some thing like /home/amsn/plugins/tls1.4 .
the files in /tls1.4 looked like this
libtls.1.4.so
pkglindex.tsl
tls.tcl
okay after extracting, i restarted amsn and still it didnt work. this time it said "host unreacheable". Then i went to preferences -> application in amsn and gave the path of tsl libraries i.e /home/amsn/plugins/tls1.4. Then i restarted amsn again and it worked.
Now its working all fine and good
Good Day
Testing?What's that? If it compiles, its good, if it boots up it is perfect.
----------------------------------------------------
Imran
Registered Linux User # 334322
----------------------------------------------------
Imran
Registered Linux User # 334322
-
- Major General
- Posts: 917
- Joined: Thu Jun 27, 2002 5:45 pm
- Location: Karachi
- Contact:
ADAB..
If some One has a little bit time plz also give me replay.. i am also stugling with my lan card..not able to lod the module for it.
a compleat discution about lan card is avail able at
http://www.linuxpakistan.net/forum2x/vi ... .php?t=762
plz give me replay i am having hard time..
as i took some meber who replay me in my earlay post i did mail to them but no body replays plz help me if any may be ur help and few lines are pricious 4 me. thanks.
RAB RAKAHA.
If some One has a little bit time plz also give me replay.. i am also stugling with my lan card..not able to lod the module for it.
a compleat discution about lan card is avail able at
http://www.linuxpakistan.net/forum2x/vi ... .php?t=762
plz give me replay i am having hard time..
as i took some meber who replay me in my earlay post i did mail to them but no body replays plz help me if any may be ur help and few lines are pricious 4 me. thanks.
RAB RAKAHA.
{s7r1k3r}
Be MiNe.
Be MiNe.