Problem installing REDHAT Linux 5 on Dual Core

Discussion regarding the installation and configuration of Linux distributions.
Post Reply
hassandit
Cadet
Posts: 13
Joined: Mon May 05, 2008 11:09 am
Location: Karachi
Contact:

Problem installing REDHAT Linux 5 on Dual Core

Post by hassandit »

Salam, I use this configuration intel core 2 duo cpu e8200 2.66ghz system in my office. I have a problem to install linux in my system. 1st when i enter or type linux text on 1st screen then system hang on sum pci problem.

I resolve that problem for inserting "Linux pci=nommconf" at 1st screen, it works fine, after that when i select media type for installation it want driver either select cdrom or hard disk. I don't no why?

Please solve my problem I really want to install Linux on my system.

Thanks.
LinuxFreaK
Site Admin
Posts: 5132
Joined: Fri May 02, 2003 10:24 am
Location: Karachi
Contact:

Re: Problem installing REDHAT Linux 5 on Dual Core

Post by LinuxFreaK »

Dear hassandit,
Salam,
hassandit wrote:Salam, I use this configuration intel core 2 duo cpu e8200 2.66ghz system in my office. I have a problem to install linux in my system. 1st when i enter or type linux text on 1st screen then system hang on sum pci problem.

I resolve that problem for inserting "Linux pci=nommconf" at 1st screen, it works fine, after that when i select media type for installation it want driver either select cdrom or hard disk. I don't no why?

Please solve my problem I really want to install Linux on my system.
Are you using SATA or SCSI drives ?

Best Regards.
Farrukh Ahmed
hassandit
Cadet
Posts: 13
Joined: Mon May 05, 2008 11:09 am
Location: Karachi
Contact:

Post by hassandit »

Salam, I use SATA drive and also use this command found during searching "Linux all-generic-ide noapic nolapic" which is not working when i use this "Linux pci=nommconf all-generic-ide noapic nolapic" its works and hang on /sbin/loder.

I don't know how I can install it.

:?:
LinuxFreaK
Site Admin
Posts: 5132
Joined: Fri May 02, 2003 10:24 am
Location: Karachi
Contact:

Re:

Post by LinuxFreaK »

Dear hassandit,
Salam,

Just use noapic and try again. I hope it will solve you problem.

Best Regards.
Farrukh Ahmed
Post Reply