I want to establish this scenario can i use a digium x100p clone card as FXO with this and my lan card as FXS
please help me at asterisk
-
- Havaldaar
- Posts: 142
- Joined: Fri Sep 22, 2006 8:33 pm
- Contact:
-
- Site Admin
- Posts: 5132
- Joined: Fri May 02, 2003 10:24 am
- Location: Karachi
- Contact:
Re:
Dear zaigham_tt,
Salam,
Brother please read about following configuration files.
/etc/zaptel.cfg
/etc/asterisk/zapata.conf
/etc/asterisk/sip.conf
/etc/asterisk/extensions.conf
If you need help you can take a look at http://www.voip-info.org for reference.
Best Regards.
Salam,
Brother please read about following configuration files.
/etc/zaptel.cfg
/etc/asterisk/zapata.conf
/etc/asterisk/sip.conf
/etc/asterisk/extensions.conf
If you need help you can take a look at http://www.voip-info.org for reference.
Best Regards.
Farrukh Ahmed
-
- Site Admin
- Posts: 5132
- Joined: Fri May 02, 2003 10:24 am
- Location: Karachi
- Contact:
Re:
Dear zaigham_tt,
Salam,
You can take a look into this.
FYI, http://www.automated.it/guidetoasterisk.htm
Best Regards.
Salam,
You can take a look into this.
FYI, http://www.automated.it/guidetoasterisk.htm
Best Regards.
Farrukh Ahmed
-
- Havaldaar
- Posts: 142
- Joined: Fri Sep 22, 2006 8:33 pm
- Contact:
-
- Battalion Quarter Master Havaldaar
- Posts: 228
- Joined: Fri Jan 28, 2005 6:23 pm
- Location: Karachi
please help me at asterisk
Dear zaigham_tt,
First you need to clear your concepts , what is FXO and what is FXS .
Second lan card and and FXO card , both are two different things .
Use Soft phone ( eyebeam or bria ) as a phone on your system and digium card as a FXO .
Reading Asterisk guide will not help you if you don't know whats the difference between FXO and FXS .
Here is some conceptual thing , may be it will help .
FXO ------ connect phone line ( example PTCL )
FXS ------ connect your phone ( your home telephone )
Your can use IP phone or Soft phone , so you don't need any FXO port .
http://www.3cx.com/PBX/FXS-FXO.html
Wish you all the best .
Regards,
M Asad Rasheed
First you need to clear your concepts , what is FXO and what is FXS .
Second lan card and and FXO card , both are two different things .
Use Soft phone ( eyebeam or bria ) as a phone on your system and digium card as a FXO .
Reading Asterisk guide will not help you if you don't know whats the difference between FXO and FXS .
Here is some conceptual thing , may be it will help .
FXO ------ connect phone line ( example PTCL )
FXS ------ connect your phone ( your home telephone )
Your can use IP phone or Soft phone , so you don't need any FXO port .
http://www.3cx.com/PBX/FXS-FXO.html
Wish you all the best .
Regards,
M Asad Rasheed
registered linux user #394856
http://www.bsdpakistan.org
http://www.bsdpakistan.org
-
- Havaldaar
- Posts: 142
- Joined: Fri Sep 22, 2006 8:33 pm
- Contact:
salam
thx 4 reply
i know the difference b/w FXO(Office) and FXS(station) but i didn't know the difference b/w Lan and FXS thats why i asked, will it be possible to use lan instead of FXS if it is not possible then could u tell me the price of FXS, the problem is that i have to use a normal land line phone at both ends.
The scenario in figure is that calling party calls to one of our phone lines (only one in figure) connected to server and server matches the incoming and connected number and route the call through IP to the corresponding IP which is bounded in the server’s routing table like an extension but to a pc with an ip address. Another Server will be connected to another landline. Server 2 dial the destination number through attached line and ultimately two local loops get connected to each other through internet IP network.
thx 4 reply
i know the difference b/w FXO(Office) and FXS(station) but i didn't know the difference b/w Lan and FXS thats why i asked, will it be possible to use lan instead of FXS if it is not possible then could u tell me the price of FXS, the problem is that i have to use a normal land line phone at both ends.
The scenario in figure is that calling party calls to one of our phone lines (only one in figure) connected to server and server matches the incoming and connected number and route the call through IP to the corresponding IP which is bounded in the server’s routing table like an extension but to a pc with an ip address. Another Server will be connected to another landline. Server 2 dial the destination number through attached line and ultimately two local loops get connected to each other through internet IP network.