To configure a USB flash/pen drive perform the following steps:
1. Format the USB flash drive as one FAT partition.
#mkdosfs /dev/
2. Copy the contents of /RedHat/isolinux/ from the first installation CD to the USB flash drive. NOTE: isolinux.bin, boot.cat and TRANS.TBL can be removed or deleted.
3. Rename isolinux.cfg to syslinux.cfg.
4. Copy /RedHat/images/pxeboot/initrd.img from the first installation CD to the USB flash drive.
5. OPTIONAL: To configure any boot settings, edit the syslinux.cfg on the USB flash drive. For example to configure the installation to use a kickstart file shared over NFS,specify the following:
#linux ks=nfs:://ks.cfg
6. Make the USB flash drive bootable. Be sure to UNMOUNT the USB flash device.
#umount /dev/
#syslinux /dev/
7. Install GRUB on the USB flash drive.
#mount /dev/ /path/to/local/USB/mount
#grub-install --root-directory=/path/to/local/USB/mount /dev/
8. Verify that the USB flash drive has a /boot/grub directory. If it does not, create the directory manually.
#cd /path/to/USB/local/mount
#mkdir -p /boot/grub
9. Create the grub.conf file. Below is a sample grub.conf:
default=0
timeout=5
root (hd1,0)
title
kernel /vmlinuz
initrd /initrd.img
10. Copy or confirm the created grub.conf file is on the /boot/grub/ directory of the USB flash drive.
visit the link
http://kbase.redhat.com/faq/FAQ_42_11806.shtm
create a bootable USB pen drive for linux installation
create a bootable USB pen drive for linux installation
**********************************************
As-Salaatu was-Salaamu Alaika Ya Sayyidi Ya Rasool ALLAH
**********************************************
As-Salaatu was-Salaamu Alaika Ya Sayyidi Ya Rasool ALLAH
**********************************************