Aslam-o-Aliakum,
I've two networks but now i want to share resource (e.g. Printer, Files etc.) between these two networks... here is configuration of two networks...
1st Network (A Network) :
Windows NT Sever 4.0 (SP5)
Subnet Class C 255.255.255.0 ... Currently 20 Clients are there... running on DHCP... File server is on this network + Network printers
2nd Network (B Network) :
Linux Redhat 8.0
Subnet Calss B 255.255.0.0 ... Currently 25 or more clients are there.... running on static IPs
---------------
I need to shared printer and file server on... other networking... how can i do share resource of A Network on B Network and vice versa... thx
Sharing Resources between TWO Networks
-
- Battalion Quarter Master Havaldaar
- Posts: 224
- Joined: Tue Aug 13, 2002 12:52 pm
- Location: Islamabad
- Contact:
Sharing Resources between TWO Networks
if u find anything which shows my lack of knowledge,
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
-
- Site Admin
- Posts: 195
- Joined: Wed Aug 07, 2002 8:00 pm
- Location: Multan, Pakistan
- Contact:
Assalam O Alaikum
What you need in your scenerio is Bridging of the two networks ...... You can do it either on the windows side or the linux side ... ... thats what i found while searching around .. I did it in linux too but it was far more difficult lol :p anyways the link is
http://www.j51.com/~sshay/tcpip/routing/routing.htm
what it states is that you will be needing a server / client with 2 nics, that can act as a router between the two subnets ... rest is given in the details...
try it and let me know if it works
cheers
--uppal
What you need in your scenerio is Bridging of the two networks ...... You can do it either on the windows side or the linux side ... ... thats what i found while searching around .. I did it in linux too but it was far more difficult lol :p anyways the link is
http://www.j51.com/~sshay/tcpip/routing/routing.htm
what it states is that you will be needing a server / client with 2 nics, that can act as a router between the two subnets ... rest is given in the details...
try it and let me know if it works
cheers
--uppal
Junaid Saeed Uppal
uppal at linux dot net dot pk
Cell : +92.345.8586045
uppal at linux dot net dot pk
Cell : +92.345.8586045
linuxgeek is rite
aoa
when there r 2 or more networks then u have to use a router in between
router's work is to communicate between more than one network either it can be a router device or it can be a dedicated pc haveing nic belong ot 2 differne t networks
good luck.reply back when u r done
when there r 2 or more networks then u have to use a router in between
router's work is to communicate between more than one network either it can be a router device or it can be a dedicated pc haveing nic belong ot 2 differne t networks
good luck.reply back when u r done
-
- Battalion Quarter Master Havaldaar
- Posts: 224
- Joined: Tue Aug 13, 2002 12:52 pm
- Location: Islamabad
- Contact:
Aslam-o-Aliakum,
If i install a system which act as router (as per my knowledge i can shared and access only this box on both sides i mean on both subnets) how can i share or access A Network File Server and HP 4100N Printer.
If i install a system which act as router (as per my knowledge i can shared and access only this box on both sides i mean on both subnets) how can i share or access A Network File Server and HP 4100N Printer.
if u find anything which shows my lack of knowledge,
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
-
- Battalion Quarter Master Havaldaar
- Posts: 224
- Joined: Tue Aug 13, 2002 12:52 pm
- Location: Islamabad
- Contact:
On B Network (Which is linux network) samba is running...fawad wrote:if, what protocol are you using for file sharing? I have no idea about NFS, but for SMB,
I never install WINS server... But in samba i read somewhere about WINS setting... Is what u r talking about???? or what ????fawad wrote:you'll want to set up a box as a WINS server
What this mean, when u say
Is u r saying that WINS server will be install on B Network and on A Network (which is Windows network) WINS setting is needed???fawad wrote:and have all the boxes use that for name resolution.
if u find anything which shows my lack of knowledge,
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if
please guide me... thx
------------------------------------
Aslam-o-Aliakum-Wa-Rahmatullah-Wa-Barakatuhu
------------------------------------
if